AIRDR(™)-G3 Retrofit – Wireless

Made in USA

The AirDR™ G3+ is a durable, low-dose 17″x17″ Wireless DR panel equipped with directly deposited Cesium Scintillator which proves unparalleled image quality.

The detector provides integrated AED (Automatic Exposure Detection) which allows for seamless, retrofit integration and no-hassle implementation into your practice. The AirDR™ G3+ system is compatible with any X-Ray system to work with 43x 43 cm cassettes that comply with ISO 4090.

Lightweight at only 7.2 lbs (3.3 kg)  has 139-micron active-matrix that guarantees image resolution up to 3.0 lp/mm. With an IP52 Water and Dust rating, the panel is designed to endure any unforeseen accidents. 

• 139 Micron
• 16 Bit Resolution
• 9.3 Megapixel
• 6.4 lbs
• Wireless Charging

The AirDR™ G3+ is a lightweight digital radiographic system designed to optimize workflow, increase throughput, and eliminate unnecessary exposures to patients. Its durable frame and wireless capabilities allow you to complete imaging freedom for even the most difficult image projections. Using advanced acquisition software, the AirDR™ G3 allows you to achieve unprecedented workflow and save valuable time.

Detector

The AirDR™ G3+ is a 139-micron, direct deposit Cesium scintillator, flat-panel detector. The detector transmits images to the acquisition station through a WiFi connection, eliminating the need for a hardwire cable. If WiFi is unavailable, a back-up cable connection can be used. Powered by a Cesium Iodide Scintillator, the detector delivers high-resolution images at the lowest possible dose.

Other panels on the market can have as many as 5 separate sensors and the panel relies on these sensors to work in concert to acquire an image. Multi-sensor panels are often vulnerable to failure points between sensors, which can cause “no triggers” and “false triggers” during a routine study and ultimately lead to unnecessary repeat exposures for patients.

Panel: Active TFT Amorphous Silicon / Diode Array, Carbon Fiber Construction
Scintillator: Direct Deposit: Cesium Iodide / DRZ+

AIRDR(™)-G3 Retrofit – Wireless Specifications

Pixel Matrix: 3072 X 3072
Size of Pixel: 139µm
Grayscale: 16 bit
Cycle Time: 5.6 Seconds
Active Area: 424x424mm
Temperature: 10°C to 35° C, 10 – 90% Room Humidity (non-condensing)

External Dimensions: 46 x 46x 1.5 cm
Weight: 3.3Kg
Maximum Weight: 150 kg

X – Ray Window: 350- 4000 ms
Wireless Interface: Gigabit Ethernet IEEE 802.11 n/ac 5Gbps
Wireless Modes: Station (STA) or Acces Point (AP)
X-Ray I/ F: Line trigger: DR trigger Mode Auto trigger: AED Mode
Spatial Resolution: 3 Ip/mm
Typical MTF: > 57% at 1 Ip/mm, >28% at 2 Ip/mm,> 16% at 3 Ip/mm
Typical DQE: >78% at 0 Ip/mm, >58% at 1 Ip/mm, >42% at 2Ip/mm, >24% at 3 Ip/mm
Battery: Lithium Polymer, 1600 images over 8hrs .